System update

[Msidafix]

I just got my 2016 Inscription back from the dealership after normal maintenance. I was very disappointed with the new system update. The biggest issue for me is when I put the car in reverse the rear camera only comes on by default and I have to select the 3D option each time. Prior to the update 3D was on by default. I can't find where I can reset the default. Does anyone know how to change the default reverse options?

 

[crewcabrob]

No, but I would love to know if there is a setting for that. I would like 360 degree camera each time for reverse

Rob

 

[SRG963]

Agreed, 360 by default would be great.

 

[Coolos]

I don't have the issue myself, always shows on 360 when I reverse. I guess that you need to register this in your driver settings.

 

[SRG963]

I don't have the issue myself, always shows on 360 when I reverse. I guess that you need to register this in your driver settings.

FWIW There are not settings for this on my Sensus. It's rear camera by default.

 

[Coolos]

In Driver profile you can store (or not) a lot of the settings. There is in it an option to not change settings (like a protection mode). If that option is on and the default setting is rear view camera then each time you will have to change the option to have 360 back.

 

[AaronBaker]

According to the manual:


Selecting the camera's basic view when reversing
With Auto Camera Reverse Activation selected, the driver can also choose the camera view to be used when reversing: the rear view or 360° view*.
Tap Settings in the center display's Top view.
Tap My CarPark Assist.
Select Rear View Instead of 360° to set the rear view as default.